MAC114C-0-MD-3-C/130-B-0/S005

MPN: R911230267

No Tariffs On US Orders
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Ask for Availability

Preparing your secure checkout page...

MAC Permanent Magnet Motor manufactured by Bosch Rexroth Indramat. This motor has a power connecter on Side B. This motor also includes a C encoder and a Not Equipped blocking brake.

Quote Request Form:

Warranty
Wake Industrial Warranty
To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The MAC114C-0-MD-3-C/130-B-0/S005 AC servomotor offered by Bosch Rexroth is available without a blocking brake. This motor incorporates S1 and S6 operating modes. The product must be operated only after reading and understanding its documentation. This device can be installed vertically with the output shaft facing upward or downward. The unit cannot be used for residential applications. It is excited by permanent magnets. This motor is capable of performing electronic commutation.The product is characterized by low inertia. This device encompasses an output shaft with a keyway as per DIN 6885-1 specifications. The unit comes with its rotor fitted on the output shaft. Its radial forces are absorbed by the floating bearing on Side A. This motor is meant to be connected by using the manufacturer's cables to eliminate additional installation work. The product features a form-fitting shaft-hub connection. This device is not damaged by a jet of water on its housing.

The unit has an IP 65 protection class. It can be operated under weatherproofed conditions in a stationary manner. This motor can be coated with an extra layer of paint of a maximum thickness of 40 um. The product is prone to a fracture of the output shaft because of ever-increasing deformations. This device is protected by the penetration of liquids into the housing along the output shaft by the mounting flange. The unit is affected by axial and radial forces on its output shaft and bearings when it is in use. Its grind-in process involves running the motor at approximately 100 rpm speed. This AC servomotor supports changing the output direction of its angular feedback connector.

Blocking Brake
No
Inertia
Low
Number of Tapped Holes
2
Number of Windings
2
Output Shaft Position
Side A
Output Shaft Type
Keyway
Run-In Speed for Grinding
100 RPM
Second Shaft End
Yes
Support for Customer's Encoders
Yes
Winding Code
MD
  • MAC114C0MD3C/130B0/S005
  • MAC114C 0 MD 3 C/130 B 0/S005
  • mac114c-0-md-3-c/130-b-0/s005

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo