MAC112D-0-FD-4-C/130-B-1/WI524LVS005 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911230106
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC112D-0-FD-4-C/130-B-1/WI524LVS005 is a motor designed for analog drives and is part of the MAC AC Servo Motors series. It features a natural convection cooling system, has a nominal speed of 2000 RPM, and comes equipped with a standard blocking brake rated at 45 Nm. The motor uses an incremental encoder for position feedback and has a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC112D-0-FD-4-C/130-B-1/WI524LVS005 is an AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is designed for analog drive controllers, where it converts controlled current into precise shaft movement for automated presses, gantry axes, and material-handling stations. Within these systems, the motor acts as the primary torque source between the electrical control loop and the driven mechanism. Because it is intended for analog drive platforms, it fits equipment that uses separate motion feedback channels for speed regulation and position tracking.
A standard blocking brake rated at 45 Nm holds the shaft when power is removed, which helps prevent back-driving on vertical axes or other loads that must remain in place at standstill. Precise mechanical alignment to couplings or gearboxes is aided by a 130 mm centering diameter. Heat generated in the stator is removed through natural convection, so no external blower or liquid circuit is required. The winding code FD is matched to a nominal speed of 2000 rpm, giving the motor a practical operating range for general-purpose positioning tasks. The motor also uses standard tachometer feedback so the connected analog drive can maintain closed-loop speed control when the load changes during operation.
Frame size 112 establishes the mounting footprint, while length code D indicates a longer stack length that supports higher continuous torque than shorter versions in the same frame family. Electrical power is routed through a connector on side B, which keeps the cable exit away from the machine-side interface. Position information is supplied by an incremental encoder mounted in the standard location, supporting accurate motion control in the paired drive. The tachometer generator produces 3 V/1000 rpm for speed feedback to legacy analog regulators. Separating the encoder and tachometer functions allows the motor to interface cleanly with control architectures that monitor velocity and position on different channels.
Frequently Asked Questions about MAC112D-0-FD-4-C/130-B-1/WI524LVS005:
Q: Does the MAC112D-0-FD-4-C/130-B-1/WI524LVS005 servo motor include a blocking brake?
A: The MAC112D-0-FD-4-C/130-B-1/WI524LVS005 comes standard with a blocking brake for secure holding when powered off.
Q: What is the blocking brake torque specification for this Bosch Rexroth Indramat servo motor?
A: The blocking brake on this motor provides a holding torque of 45 Nm.
Q: Where is the power connection located on the MAC112D-0-FD-4-C/130-B-1/WI524LVS005?
A: Power for the MAC112D-0-FD-4-C/130-B-1/WI524LVS005 is connected via a side B connector.
Q: What type of position feedback does the MAC112D-0-FD-4-C/130-B-1/WI524LVS005 servo motor provide?
A: This model utilizes an incremental encoder for position feedback, mounted following the standard configuration.
Q: What cooling method is used for the MAC112D-0-FD-4-C/130-B-1/WI524LVS005 AC servo motor?
A: The MAC112D-0-FD-4-C/130-B-1/WI524LVS005 features natural convection cooling for heat dissipation without external fans.
