Product Description:

The MAC112D-0-ED-4-C/130-A-0/WI5LX/S005 belongs to the MAC AC Servo Motors series and is supplied as a motor for analog drives. It converts commanded current from a drive controller into regulated torque and speed for positioning and contouring tasks in automated machinery and material-handling equipment. Tacho feedback closes the velocity loop for the drive, allowing the motor to respond consistently to changing load conditions during normal axis movement. This makes the unit suitable for packaging stations, transfer axes, and other systems that rely on smooth analog speed regulation during frequent starts, stops, and direction changes.

The motor is aligned to the machine housing by a 130 mm centering shoulder, which helps maintain repeatable radial positioning during installation. Heat dissipates through natural convection, so the frame must remain in free air to stay within thermal limits without external blowers. A nominal shaft speed of 3000 min⁻¹ is the normal operating speed for many applications, and the motor has no blocking brake, so holding force must be supplied externally when power is removed. The power leads exit through a connector on side A, which can simplify cable routing inside the machine. Winding code ED identifies resistance and inductance values used with MAC-compatible analog amplifiers for stable current control.

The motor uses size 112 with length code D, a combination that balances torque output with manageable inertia for medium-duty axes. A rear-mounted tacho generator delivers 3 V/1000 min⁻¹, giving the controller a proportional speed signal with standard accuracy. An integrated Incremental encoder supplies position information for finer regulation, and the tacho quality is standard for general-purpose motion. Because the encoder supports position monitoring while the tacho generator provides speed-related voltage, the drive can handle both repeatable positioning and steady velocity control.