4.95 based on 202 reviews

🙶 First-time customer with Wake Industrial. The ordering process was completely seamless. The part that we o... 🙷

MAC112D-0-ED-4-C/130-A-0/WI520LV Bosch Rexroth Indramat

In-Stock, Ships Today

Preparing your secure checkout page...

The Bosch Rexroth Indramat MAC112D-0-ED-4-C/130-A-0/WI520LV is a motor for analog drives, part of the MAC AC Servo Motors series. It features a nominal speed of 3000 rpm, a centering diameter of 130 mm, and uses natural convection for cooling. The motor is equipped with an incremental encoder with standard mounting for position feedback and has no blocking brake.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The MAC112D-0-ED-4-C/130-A-0/WI520LV is a servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Classified as a motor for analog drives, it supplies controlled torque and velocity for automated axes that rely on analog command interfaces. The unit fits into machine layouts where precise speed following and position holding are required without added braking hardware. In typical operation, an external amplifier regulates motor current and uses the feedback signals to correct motion changes caused by varying load conditions.

The mechanical frame uses a centering diameter of 130 mm, couples to mounting flanges sized for the MAC 112 housing, and supports the 112 frame code for overall stator width. Rotor stack depth follows the D length designation, providing additional active iron for higher continuous output. Heat is dissipated through natural convection, so no external blower or liquid circuit is needed. Rated velocity reaches 3000 rpm, enabling direct connection to gearboxes or belt transmissions. This speed range suits machine axes that use moderate gear reduction or direct coupling to compact transmission elements. The ED winding code supplies electrical resistance and inductance values matched to Indramat analog amplifiers, while the motor ships without a blocking brake, leaving stopping torque generation to the connected drive or external mechanics.

Speed feedback is delivered through a tachogenerator that produces 3 V/1000 rpm and through an incremental encoder mounted in the standard position, giving pulse trains for digital counting. This dual-channel arrangement supports either velocity loops from the tacho or position loops from the encoder, depending on the controller used. Power enters through a connector on side A, simplifying cable runs when the motor is installed with its shaft toward the process zone. Tacho quality is standard, and the ED winding supports the natural-convection cooling scheme by keeping current density within the limits of the insulation system.

Blocking Brake
Not Present
Centering Diameter
130 mm
Cooling Type
Natural convection
Feedback Configuration
W/ tachofeedback incremental or absolute encoder
Motor Length
D
Motor Size
112
Nominal RPM
3000min-1
Power Connection Location
Connector to side A
Product Type
Motor for analogue drives
Tacho Quality
Standard
Tacho voltage
3V/1000min-1
Type of position feedback
Incremental encoder with standard mounting
Winding Code
ED

Frequently Asked Questions about MAC112D-0-ED-4-C/130-A-0/WI520LV:

Q: Does the MAC112D-0-ED-4-C/130-A-0/WI520LV motor include a blocking brake?

A: This model is manufactured without a blocking brake.

Q: What cooling method is used in the MAC112D-0-ED-4-C/130-A-0/WI520LV servo motor?

A: The MAC112D-0-ED-4-C/130-A-0/WI520LV features natural convection cooling without forced ventilation.

Q: What is the centering diameter of the MAC112D-0-ED-4-C/130-A-0/WI520LV motor?

A: A 130 mm centering diameter is used on this model to align and mount the motor.

Q: What type of feedback does the MAC112D-0-ED-4-C/130-A-0/WI520LV motor utilize?

A: The feedback configuration supports a tachofeedback incremental or absolute encoder for position sensing.

Q: Where is the power connection located on the MAC112D-0-ED-4-C/130-A-0/WI520LV motor?

A: The power connector for this model is situated on side A of the motor.


Internal Product Review

  • ‘‘The MAC112D-0-ED-4-C/130-A-0/WI520LV is a well-built motor for analog drives with natural convection cooling. A 3000 rpm nominal speed and an incremental encoder with standard mounting make the package especially capable for precise servo duty. Tachofeedback with 3 V/1000 min-1 tacho voltage is a strong highlight for stable signal handling.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo