Product Description:

The MAC112C-0-KD/130-0/S05 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Delivered as a standalone electromechanical actuator, it works with analog drive controllers to position and regulate machine axes in industrial automation cells. It is intended for equipment that requires continuous speed following and responsive torque in closed-loop motion tasks. Packaging lines, material-handling gantries, and automated assembly stations commonly use motors of this type. Its format also suits installations where the motor is mounted close to the driven mechanism and connected to a separate amplifier.

Heat generated during operation is removed by natural convection, so the housing needs unobstructed airflow around its surface. Position and velocity are referenced through incremental encoder feedback, which provides pulse signals that an analog drive uses for real-time correction. The stator and rotor lengths correspond to the C build code, while the mounting flange follows the 112 frame size. Under rated conditions, the motor reaches a nominal speed of 1500 rpm. That speed suits machines that favor steady mid-range operation rather than very high spindle velocity. This combination gives the motor a moderate mechanical envelope and stable speed behavior for general axis control.

Electrical behavior is set by the KD winding code, which establishes the phase resistance and inductance expected by the drive amplifier. In combination with the feedback device, this winding supports smooth torque transitions without magnetic oversaturation during peak commands. Because the winding and feedback are matched to analog amplification, the motor can respond predictably to changing command signals and load disturbances. Its designation as a motor for analog drives indicates compatibility with controllers that generate proportional voltage or current references instead of digital position packets.