MAC112C-0-HD-2HC/130-A-0/S005 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911237171
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC112C-0-HD-2HC/130-A-0/S005 is a motor for analog drives in the MAC AC Servo Motors series. It features a natural convection cooling system, a centering diameter of 130 mm, and a motor size of 112. This model has a nominal speed of 2000 RPM and includes standard tachofeedback with a tacho voltage of 1.5V per 1000 RPM.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC112C-0-HD-2HC/130-A-0/S005 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Intended for analog drive systems, it converts command current into controlled torque and speed for positioning, conveying, and forming axes in automated machinery. The motor uses a flange-mounted housing that helps keep the shaft aligned with couplings, pulleys, or gear inputs during installation. An integrated tacho generator provides continuous speed information so the connected drive can correct load-related changes during operation.
The motor size code 112 indicates the stator diameter and magnetic cross-section used in this frame. A centering diameter of 130 mm provides the mounting reference surface, which helps limit runout when the flange bolts are tightened. Length code C identifies the third housing length offered in the series. That housing length provides more active material than shorter versions, supporting continuous output without changing the basic frame diameter. Under rated excitation, the shaft turns at 2000 rpm, a speed suited to medium-inertia axes powered by analog amplifiers. For closed-loop regulation, the internal tacho produces 1.5 V/1000 rpm, giving the controller a linear speed signal.
Heat is removed solely through natural convection, so airflow around the housing should remain open during operation. The motor uses tacho feedback with standard accuracy, which is suitable for speed regulation and general motion tasks where ultra-fine position resolution is not required. Power conductors leave through a connector on side A, keeping the cable exit on the non-drive end for simpler routing and strain relief. Cable placement on the A-side can also help keep motor leads clear of the driven load in front-mounted machine layouts. Winding code HD indicates the electrical winding used with compatible MAC analog controllers. Because the motor does not include a blocking brake, any static holding function must be supplied by the drive or by external mechanical hardware.
Frequently Asked Questions about MAC112C-0-HD-2HC/130-A-0/S005:
Q: What cooling method does the MAC112C-0-HD-2HC/130-A-0/S005 servo motor use?
A: The MAC112C-0-HD-2HC/130-A-0/S005 motor is cooled using natural convection, so it operates without external fans.
Q: What type of feedback is provided by the MAC112C-0-HD-2HC/130-A-0/S005 servo motor?
A: This model provides tachofeedback for feedback configuration, enabling speed monitoring via a tacho generator.
Q: What is the nominal RPM of the MAC112C-0-HD-2HC/130-A-0/S005 servo motor?
A: The nominal speed of this motor is rated at 2000 revolutions per minute.
Q: Does the MAC112C-0-HD-2HC/130-A-0/S005 motor include a blocking brake?
A: The blocking brake is not present in the MAC112C-0-HD-2HC/130-A-0/S005 servo motor.
Q: Where is the power connection located on the MAC112C-0-HD-2HC/130-A-0/S005 servo motor?
A: The power connection for this motor is located on connector side A.
