MAC112C-0-ED-4-C/130-A-1/WI520L/S05
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth MAC112C-0-ED-4-C/130-A-1/WI520L/S05 AC servomotor is intended for use with a suitable drive controller. The device has ED windings type. The nominal rpm of its winding is 3000 per minute.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MAC112C-0-ED-4-C/130-A-1/WI520L/S05 is a reliable AC servomotor that uses the tacho feedback option that is specially designed for motors in the MAC series. The device incorporates a standard holding brake with a holding torque of 40 Nm. For additional feedback, the unit is equipped with a standard-mounted incremental encoder. The nominal speed of the product is 3000 per minute. When the motor is in use, it dissipates heat from its windings to the external wall of its housing. The maximum storage and transportation temperature of the motor is 85°C. The MAC motor is not intended for residential use. It is specifically designed for use in industrial environments. It can be used with a suitable drive controller. The ambient operating temperature of the unit is between 0°C and 45°C. The device adheres to DIN 40 050 specifications when it comes to the design and construction of its protective covers and housing. The motor has an IP 65 protection rating. The nominal voltage of its blocking brake is 14 V, and its nominal current is 0.75 A. The servomotor comes with a black coat. It is resistant to yellowing, chalky buildups, and weathering. The power connection of the unit is directed to side A. The device can be mounted in any orientation. It should be grounded properly to the drive amplifier. The product must be mounted to the machine only by well-trained and qualified personnel. The spigot nuts on the connectors should be screwed tightly into place when connecting the device. It should be noted that the motor must not be picked up at the blower. The servomotor is cooled by the natural convection method.
Frequently Asked Questions about MAC112C-0-ED-4-C/130-A-1/WI520L/S05:
Q: Why should heavy loads be avoided at the shaft of the MAC motor?
A: Heavy loads should be avoided at the shaft of the MAC motor because this will damage the bearings within the servomotor.
Q: What eliminates additional installation work in the MAC motor?
A: The readymade cables that come with the MAC motor eliminate additional installation work.
Q: What prevents overload damage in the MAC motor?
A: The temperature of the MAC motor is monitored using the thermos switches, which are integrated into the windings and stator housing. This setup prevents overload damage.
Q: What is the use of the incremental encoder of the MAC motor?
A: The incremental encoder of the MAC motor is used for position evaluation.
Q: What are the feedback options for the MAC motor?
A: The MAC motor is equipped with a tacho feedback and a mounted incremental encoder as its feedback options.
