Product Description:

The MAC112C-0-CD-3-F/130-B-0/S095 is a servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Classified as a motor for analog drives, it receives analog current commands from compatible drive amplifiers and translates them into controlled shaft torque for positioning, indexing, or continuous-speed tasks in industrial automation. The device is built on a 112-frame platform and is intended for installation in systems that use analog feedback loops rather than fully digital fieldbus communication. This arrangement suits machinery that relies on direct amplifier-to-motor control with continuous speed and torque regulation.

This model reaches a nominal speed of 5000 rpm, allowing rapid cycle times when paired with suitably rated gearing or direct-drive loads. Accurate velocity information is supplied by a tachogenerator that outputs 1.5 V/1000 rpm, and the returned signal rises in proportion to armature speed. A centering diameter of 130 mm supports accurate alignment with precision machine flanges. Heat produced by copper losses is removed through natural convection, so no external blower or liquid circuit is required. Power conductors are routed through a connector on side B, which helps keep cable routing clear of the active machine area in many installations.

The motor has a size of 112 and a length code of C, which indicate the stack length used for this frame. The stator uses winding code CD, which sets the electrical characteristics expected by compatible analog drive modules. Vibration is reduced by the tachogenerator's improved smooth-running quality, which supports applications that need stable motion and consistent surface results. The motor has no blocking brake, and the second shaft end with tachofeedback can support auxiliary encoders or other coupled elements that need through-shaft power transfer.