Product Description:

The MAC112B-0-PD-2-C/180-B-0/S003 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Supplied as a motor for analog drives, it converts drive commands into rotary motion for automated gantries, presses, and conveyor modules. The assembly uses length code B, giving it a moderate stack height that balances torque output and inertia. Its layout suits machine axes that need predictable response and repeatable motion during indexing, conveying, and other continuous-duty tasks.

Mechanical alignment to the machine is handled by a centering diameter of 180 mm, which helps seat the motor concentrically in large bearing plates. Heat is removed through natural convection, so surrounding air around the housing is used instead of auxiliary blowers. The rated shaft speed is 1500 min⁻¹, providing the nominal operating speed for the matching control loop. Winding code PD indicates the electrical winding version used with compatible drive amplifiers. Rotor velocity feedback is produced by integrated tacho feedback, allowing the drive to monitor speed continuously during operation.

This configuration is delivered without a blocking brake, so static holding must be provided by external mechanics or continuous drive torque when the axis is at standstill. Power conductors enter through a connector on side B, which can simplify cable routing when the shaft faces the operator. The tachogenerator outputs 3 V/1000 min⁻¹, and that signal level matches the input range used by the paired controller. Frame code 112 gives the motor a housing size that remains manageable while providing enough rotor cross-section for medium continuous torque. The arrangement supports installations where the cabinet layout and cable exit direction need to remain consistent along the machine frame.