MAC093C-2-KS-4-C/110-A-1/DI520LB/S001
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC093C-2-KS-4-C/110-A-1/DI520LB/S001 motor is part of the MAC AC Servo Motors series and weighs 22 kg. It provides a continuous torque at standstill of 19.5 Nm, operates at a nominal speed of 2000 rpm, and features axial surface cooling with a standard blocking brake. The servo motor supports AC 115 V blower voltage and includes an incremental encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC093C-2-KS-4-C/110-A-1/DI520LB/S001 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Targeted at analogue drive systems, the unit transforms electrical commands into precise shaft motion for positioning tables, packaging axes, and similar industrial automation tasks.
This model sustains a continuous phase current of 22 A, which generates a constant shaft torque of 19.5 Nm when the housing is kept at rated temperature by axial surface cooling assisted by a 115 V AC blower. Motor torque rises in direct proportion to current, defined by a constant of 0.910 Nm/A, while normal operation centres on a rotor speed of 2000 rpm. Short acceleration bursts are accommodated by a peak current ceiling of 110 A. Standard blocking brake hardware secures the load at standstill, the 110 mm centring diameter simplifies flange alignment, and a mass of 22 kg supports rigid mounting up to 1000 m installation altitude.
The dynamic envelope outlined above is complemented by a rotor inertia of 0.0042 kg·m², enabling responsive speed reversals without excessive drive effort. Environmental sealing meets the IP65 category, and the stator’s electrical behaviour is shaped by a winding inductance of 7.0 mH and a resistance of 0.433 Ohm. A 50-minute thermal time constant stabilises temperature swings during cycling. Size 093 geometry, length code C, and power leads exiting on side A minimise cabinet depth. Feedback is supplied by an incremental encoder with shock-damped mounting; tachometer quality is standard with 3 V per 1000 min⁻¹ output, and winding code KS links the motor to compatible drive parameters.
Wake Industrial offers same-day shipping on this motor, supplies a 1-year warranty with every purchase, and maintains a free chat tool for general specification or fault-code questions.
Frequently Asked Questions about MAC093C-2-KS-4-C/110-A-1/DI520LB/S001:
Q: What type of cooling is used in the MAC093C-2-KS-4-C/110-A-1/DI520LB/S001 servo motor?
A: This model features axial surface cooling for effective temperature management during operation.
Q: What is the continuous standstill torque of this servo motor?
A: The MAC093C-2-KS-4-C/110-A-1/DI520LB/S001 provides a continuous torque of 19.5 Nm at standstill.
Q: Where is the power connection located on the MAC093C-2-KS-4-C/110-A-1/DI520LB/S001?
A: Power connects via a side A connector on this motor model, allowing streamlined cable management.
Q: What type of position feedback does the MAC093C-2-KS-4-C/110-A-1/DI520LB/S001 support?
A: The feedback system uses an incremental encoder with shock-damped mounting for position measurement.
Q: What is the required blower voltage for the MAC093C-2-KS-4-C/110-A-1/DI520LB/S001?
A: With a blower voltage of AC 115 V, the motor operates using standard industrial power supplies.
