Product Description:

The MAC093C-1-FS-2-C/110-A-0/S005 is an AC servo motor produced by Bosch Rexroth Indramat and grouped within the MAC AC Servo Motors series. Designed for analog drive packages, the unit converts drive current into precise rotary motion for positioning or speed-regulated axes in industrial automation lines. The C-length stator and 093 frame size place it in the medium-torque class often used in material-handling gantries, packaging stations, and general machine tools. Its operating style suits applications that depend on steady speed response and repeatable motion during frequent starts, stops, and load changes.

Mechanical interface and thermal behavior are set by a centering diameter of 110 mm, allowing the flange to align directly with IEC gearbox inputs. Stator heat is removed through axial surface cooling, and an integral blower powered by AC 230 V forces air along the housing so the motor can maintain continuous torque under dense duty cycles. The rotor reaches a nominal speed of 3000 rpm, giving analog drives a predictable velocity reference for closed-loop control. Because the design includes no blocking brake, load holding during power loss must be handled by external mechanical locks or active drive torque.

Position feedback and velocity trimming are supplied through tacho feedback, using a standard-quality DC tacho generator mounted on the rear shaft to send a continuous speed signal to the controller. It delivers a calibrated output of 3 V/1000 rpm, which the analog controller can scale linearly for stable speed regulation without digital counting. Power conductors are routed through a connector on side A, which can simplify cable runs when the motor is mounted close to machinery frames or guarding. Electromagnetic behavior is set by winding code FS, matching the motor's electrical characteristics to compatible legacy MAC drives.