Product Description:

The MAC093C-1-DS-2-C/110-A-2 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. It is intended for analog drives and supplies closed-loop velocity and position control to automated axes in packaging lines, material-handling gantries, and similar machinery. The unit combines a 093 frame size with a C-length stator to provide mid-range torque while keeping overall mass moderate. Because it works with analog drive systems, it fits installations that rely on separate current regulation and external feedback processing in the companion amplifier.

The motor seats against tooling with a centering diameter of 110 mm, which helps keep the shaft aligned with the driven load. Thermal energy is removed by axial surface cooling, and an external blower rated at AC 230 V supplies airflow across the housing. This cooling method uses moving air over the motor surface instead of a liquid circuit, which helps keep the overall installation simpler. Electrical power enters through a connector on side A, which helps when the motor is mounted with the output shaft facing forward. Under rated excitation, the rotor reaches 4000 rpm, giving high traverse speed for positioning tasks, and the DS winding code matches the electrical characteristics expected by compatible MAC drives.

A heavy-duty blocking brake is integrated to hold the axis when power is removed, and its static capacity is 14 Nm. Motion feedback is provided through tacho feedback, allowing the analog controller to close the velocity loop directly from the motor signal. The sensor produces 1.5 V/1000 rpm, which gives a linear speed reference across the operating range. The brake supports holding at standstill, while the tacho signal lets the controller respond quickly to speed changes during acceleration and deceleration.