Product Description:

Bosch Rexroth Indramat manufactures the MAC093C-0-KS-2-C/110-A-0/S005 as part of the MAC AC Servo Motors series. Classified by the supplier as a motor for analog drives, it converts electrical input from analog amplifiers into rotary motion that can be applied to positioning tables, winding stations, or tool spindles in industrial automation. The built-in tachometer allows the associated drive electronics to close a speed loop without external sensors, sustaining precise regulation during continuous or cyclic duty.

This model is machined with a centering diameter of 110 mm, giving a fixed reference surface for concentric alignment to gearboxes or mounting flanges. Its winding is identified by code KS; this design sets the coil resistance and inductance so that rated current can produce the intended torque profile. Heat produced by copper losses is dissipated through natural convection, eliminating fans and reducing maintenance in sealed cabinets. Under rated excitation, the rotor reaches 2000 rpm, a speed suitable for moderate-inertia loads that still require fast cycle times. Power conductors terminate through a connector located on side A, letting machine builders route motor and feedback cables in a common direction to simplify harness layout.

The mechanical package arrives without a blocking brake, so static holding torque must come from the drive or an external clamp when the axis is idle. Motion feedback is delivered with tacho feedback; the tachogenerator produces 3 V/1000 rpm, enabling proportional speed measurement across the full operating range. Size code 093 places the stator in the mid-frame group of the series, while the C length extends the magnetic stack for additional continuous power. The tacho is graded as standard quality, matching applications that do not require reduced ripple variants.