Product Description:

The MAC093C-0-FS-4-C-110-A-2-WI517LV is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Designed for analog drives, it converts controller commands into the torque and speed needed to position axes in packaging lines, printing presses, and other automated machinery. The motor uses a permanent-magnet rotor with electronic commutation to deliver controlled rotary motion across a wide operating range. Its compact integrated design allows the drive amplifier to manage axis movement without requiring a separate external feedback package.

The winding code FS identifies the stator winding arrangement used for this motor and matches it with compatible drive modules. A frame size of 093 gives the motor its mounting envelope and shaft height for standard machine interfaces. At a rated speed of 3000 rpm, the rotor reaches its nominal operating velocity for continuous motion tasks. The centering shoulder measures 110 mm, which helps align the housing accurately to a gearbox or machine plate. Heat from continuous duty is removed by natural convection, so no external blower or liquid circuit is required. Power conductors exit through a connector on side A, which helps keep cable routing organized in compact machine layouts.

Mechanical holding is provided by a heavy-duty blocking brake that can resist up to 14 Nm, allowing vertical axes to remain locked when drive power is removed. Speed feedback for the analog controller comes from a tacho generator delivering 3 V/1000 rpm, which gives the amplifier a direct velocity signal during operation. Position information is supplied through an incremental encoder mounted in the standard adapter housing. This combination of brake, tacho feedback, and encoder feedback supports stable motion control during starting, stopping, and position correction.