Product Description:

The MAC093C-0-FS-3-C/110-A-2/S005 is an AC servo motor manufactured by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Classified as a motor for analog drives, it is size 093 and built in the C-length variant, a combination suited for medium-frame automation axes that require continuous velocity regulation and rapid positioning. In packaging machines, transfer systems, and other industrial cells, the unit converts electrical commands from legacy analog controllers into controlled rotational motion for gears, spindles, belt drives, and similar mechanical loads. Its operating concept suits applications that rely on external analog amplifiers for speed and position control.

The motor includes a Heavy-duty blocking brake, which mechanically locks the shaft when power is removed. This brake resists 14 Nm of counter-torque, so vertical axes or indexing tables can remain fixed during stops. The rotor reaches a nominal speed of 3000 rpm, and accurate alignment is aided by a 110 mm centering diameter that mates with machined mounting flanges. Heat leaves the stator through natural convection, so the housing needs free air space rather than forced ventilation. Its magnetic stack balances torque density and inertia for general industrial motion duties.

Its position and speed loop use tacho feedback and a second shaft end, providing an analog velocity signal and an auxiliary mechanical interface for external encoders or couplings. The tacho generator outputs 3 V/1000 rpm, which matches the standard tolerance for this series and allows direct connection to conventional analog drive cards without scaling networks. Power conductors are routed through a connector located on side A, which can simplify cable routing when multiple axes are arranged in a cabinet. The stator uses winding code FS, chosen for the voltage constant and thermal characteristics needed for natural cooling.