Product Description:

Bosch Rexroth Indramat manufactures the MAC093C-0-DS-4-C/130-A-2/WI519LV/S001 within its MAC AC Servo Motors series. Designed as a motor for analog drives, it converts ±10 V velocity or position commands into controlled rotary motion for mid-power automation axes. The unit integrates a tachometer and encoder so drive controllers can monitor shaft speed and angle without external sensors. This arrangement supports closed-loop operation in assembly lines, printing machines, and material-handling equipment while keeping the motor package compact.

Mechanical alignment to gearboxes or bearing plates is simplified by the 130 mm centering diameter, which locates the stator housing without additional sleeves. Under rated conditions, the shaft turns at 4000 rpm, giving a useful balance between speed range and torque density for medium-inertia loads. Dynamic stopping and holding are handled by a heavy-duty brake capable of 14 Nm, which secures vertical or indexing axes when power is removed. Heat is removed by natural convection, so no external blower or liquid circuit is required. The integrated tachogenerator produces 1.5 V/1000 rpm, giving the analog drive a proportional velocity feedback signal that supports stable speed regulation.

The electromagnetic package uses winding code DS, which matches the motor to compatible power stages through its electrical characteristics. Frame size 093 and motor length C keep the housing compact while providing the inertia needed for smooth velocity regulation. Position sensing relies on a factory-mounted incremental or absolute encoder with tachofeedback, which allows the control system to read shaft motion directly from the motor. A separate incremental encoder with standard mounting supports digital position loops when that signal type is required. All conductors leave the housing through a connector on side A, and standard tacho quality helps maintain feedback stability across the duty cycle.