Product Description:

The MAC093C-0-CS-4-C/110-B-1/WI522LV is an AC servo motor built by Bosch Rexroth Indramat for the MAC AC Servo Motors series. As a motor for analog drives, it converts drive-controller commands into mechanical rotation in automated machinery, delivering rapid and position-controlled motion for packaging, tooling, and material-handling axes. It is well suited to automated equipment that needs repeatable acceleration, stable speed control, and compact motor integration. Integrated feedback devices support both speed regulation and position monitoring within compact motion systems.

Its mechanical configuration uses a motor size of 093, a length code of C, and a centering diameter of 110 mm, so it mates directly with compatible gearboxes and mounting flanges in compact assemblies. The rotor is wound for velocity, reaching a nominal speed of 6000 rpm while still producing useful torque for short acceleration bursts. Heat produced during continuous duty dissipates through natural convection, so no external blower or liquid circuit is required. A standard blocking brake is included and released electrically from the drive to hold the shaft when power is removed. The integral tachogenerator and encoder module are mounted under the rear cover to shield sensitive components from oil spray and metal dust common in general-purpose automation cells.

Electrical terminations are arranged on a connector at side B, keeping power cabling away from signal leads and supporting orderly cable routing. The stator uses winding code CS, which sets resistance and inductance for stable current-loop behavior in compatible MAC analog amplifiers. For velocity feedback, the built-in tacho produces 1.5 V per 1000 rpm, and position information comes from the attached incremental encoder for precise indexing and interpolation during coordinated motion.