Product Description:

The MAC093C-0-CS-2-C/110-L-0 is an AC servo motor manufactured by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. It is built for analog drives, so it converts commanded electrical input into controlled rotary motion for legacy or retrofit automation equipment. Its integrated speed feedback helps the connected controller correct changes in load during acceleration, steady operation, and deceleration, which supports stable positioning and repeatable motion in production machinery. That operating style makes it suitable for axes that still rely on voltage-command servo systems instead of newer digital control platforms.

The motor uses the 093 frame code with length class C, giving it housing dimensions suited to mid-range machine axes. A centering diameter of 110 mm aligns the flange accurately with mounting plates or gearbox faces, helping keep shaft alignment consistent during installation. Winding code CS matches the electrical characteristics expected by compatible analog amplifiers, and under nominal excitation the rotor reaches 6000 rpm. This speed range suits fast handling motions and other applications that need high rotational speed without moving to a larger motor frame. The motor does not include a blocking brake, so any holding force at standstill must come from the drive or from an external mechanical device.

Cooling is provided by natural convection, so the housing depends on free ambient airflow rather than an internal fan or liquid circuit. Because no auxiliary blower is attached, surrounding clearance matters for heat dissipation and service access. Speed information is supplied through integrated tacho feedback, and the signal level of 1.5 V/1000 rpm gives the controller a proportional reference for correcting speed error. Power connections are grouped in a connector on the left side of the stator housing, which can simplify cable routing when the drive hardware is positioned to the right of the motor. The tacho quality is standard for this series.