Product Description:

The MAC093B-0-JS-2-C/110-B-0/S005 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is designed as a compact drive element for positioning and speed control in automated machinery that uses analog drive amplifiers. By converting electrical commands into precise shaft rotation, the motor provides controlled torque and velocity for material handling, indexing, and coordinated motion in industrial automation lines. Its format suits installations where reliable speed regulation and compact motor dimensions are both important.

The motor uses the 093 frame size and has a centering diameter of 110 mm, allowing direct mounting to gearboxes or machine plates with minimal alignment effort. It is configured for natural convection cooling, so heat is dissipated through the housing surface without external airflow devices. Speed and position signals are derived through integrated tachometer feedback, which suits analog controllers that calculate velocity from the generated voltage. Under rated conditions, the shaft reaches 3000 rpm, matching common transmission ratios in pick-and-place axes. The motor length is designated as B, which provides a moderate stack height for equipment that needs a balance between continuous torque capacity and limited installation depth.

Power conductors exit through a connector on side B, which can simplify cable routing when the driven load is positioned opposite the drive train. The winding code JS indicates the stator resistance and inductance set used by compatible Indramat analog amplifiers, while the generated tachometer voltage of 3 V/1000 rpm gives the controller a linear speed reference. For stopping and load holding, the machine must rely on external mechanical devices because the motor is supplied without a blocking brake. Tacho quality is standard, and the motor classification for analog drives suits equipment that continues to operate with established analog control architecture.