Product Description:

The MAC093B-0-GS-3-C/110-A-1/S007 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Built for analog drive systems, the unit converts amplifier current into controlled rotary motion for automated axes on packaging lines, transfer stations, and material-handling equipment. That operating role makes it suitable for coordinated motion where speed and position must remain consistent from cycle to cycle. Its design supports repeatable motion, stable speed regulation, and responsive axis behavior during frequent start, stop, reversing, and positioning sequences.

A centering diameter of 110 mm aligns the flange with the driven load and helps the motor seat accurately on the machine interface. The shaft operates at a nominal speed of 4000 rpm, giving the motor a high continuous running speed for servo applications that need quick response. Heat from the stator is removed by natural convection, so the mounting area should allow free airflow around the housing. The GS winding code identifies electrical characteristics matched to analog amplifiers in the same power class, and the integrated tacho generator produces 1.5 V/1000 rpm for velocity feedback during general positioning tasks. This feedback supports analog speed control without requiring separate external measurement devices.

The motor uses size 093 with length code B, and the additional shaft end allows external encoders or mechanical couplings to be fitted without changing the basic housing outline. A standard blocking brake holds the rotor when the drive is disabled, which helps keep vertical or suspended loads in place between commanded movements. Power conductors enter through a connector on side A, placing the cable exit toward the front of many machine frames and helping keep routing direct. This arrangement also keeps the electrical connection close to the amplifier side of the installation when the motor is mounted in compact equipment.