Product Description:

The MAC093B-0-GS-2-C/130-B-0/S001 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. It is designed for analog drives and works with legacy current-controlled amplifiers to provide stable speed and torque control in automated machinery. The size 093 housing with length code B gives the motor a frame format, and power is connected through a side-B connector while tachometer feedback supplies real-time speed information to the drive.

During continuous operation, the stator can supply up to 38 A, allowing the motor to sustain demanding duty without exceeding its rated thermal limits. That current corresponds to a standstill torque of 14.5 Nm, which gives the shaft solid holding capability when the axis is commanded to remain motionless. For short acceleration events, the controller may command peaks of 192 A, and the motor supports a nominal speed of 4000 min⁻¹ for fast indexing and repeatable cycle times.

A centering shoulder of 130 mm helps position the motor accurately on the machine interface for repeatable alignment. Heat buildup under natural-convection cooling is moderated by a thermal time constant of 50 min, which allows temporary overloads before winding temperature rises fully. The motor also has a torque constant of 0.388 Nm/A and an inductance of 2.0 mH, supporting predictable current-to-torque response and smoother behavior with analog amplifiers.

Wake Industrial can arrange same-day shipping for urgent orders. Quotes remain valid for 30 days. The chat tool available on the website can answer questions about type codes or fault indications.