Product Description:

The MAC093B-0-0S-4-C/110-L-0/DI594LV/S004 servo motor is produced by Bosch Rexroth Indramat as part of the MAC AC Servo Motors series. It is built for use with analog drive amplifiers, where it converts commanded current into regulated torque and speed for automated machine axes, conveyors, and material-handling stations. By integrating electrical feedback devices within the housing, the motor supplies real-time state data to the drive so closed-loop control can be maintained during acceleration, steady operation, or deceleration.

The motor uses a centering diameter of 110 mm, allowing the flange to seat accurately on matching gearboxes or mounting plates. Heat generated by the windings is removed through natural convection, so no separate blower or liquid circuit is required and cabinet airflow remains uncomplicated. Mains power reaches the stator through a connector on the left side, which supports consistent cable routing along the machine frame. The motor has a frame size of 093, placing it in the mid-range torque class of the series. The unit has no blocking brake, so mechanical clamping or drive torque must be used to hold position when the system is de-energized.

The motor has an overall length code of B, which increases active stack length without changing the mounting geometry. For velocity feedback, the motor can use tacho feedback, an incremental encoder, or an absolute encoder depending on the feedback arrangement. The tacho quality class is standard, providing consistent signal behavior for speed monitoring. Position data is further refined by an incremental encoder with shock-damped mounting, which helps protect the sensing element from vibration and torsional peaks. These feedback devices allow analog drives to read speed and angular position accurately during synchronized motion and repeatable production cycles.