MAC093A-0-WS-4-C-110-B Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC093A-0-WS-4-C-110-B is part of the MAC AC Servo Motors series and is designed as a motor for analog drives. It features a centering diameter of 110 mm, natural convection cooling, and operates at a nominal speed of 2000 RPM. The motor includes tachofeedback with either incremental or absolute encoder and has a power connection on side B.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC093A-0-WS-4-C-110-B is a servo motor built by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Classified as a motor for analog drives, it converts current commands from a legacy drive amplifier into controlled shaft rotation for positioning or feed duties in automated equipment. Its integral tacho and encoder assemblies remove the need for external feedback devices, simplifying installation on machine tools, material-handling axes, and other motion platforms that rely on precise speed regulation.
The mechanical interface is set by a 110 mm centering diameter, allowing the housing to seat firmly against standardized mounting faces. Heat produced in operation leaves the frame through natural convection, so no fan wiring or ducting is required when ambient airflow is available. Under rated load, the rotor reaches a nominal speed of 2000 rpm, giving analog controllers a predictable operating point for velocity loops. Three-phase supply conductors exit through a connector on side B, which eases cable routing when the shaft faces the workpiece. Closed-loop speed feedback comes from the internal tacho, generating 3 V/1000 rpm; this voltage supports straightforward calibration of the drive’s speed detector circuit.
The motor uses the WS winding code, matching its electrical characteristics to analog amplifiers that can deliver the required current. Frame dimensions are given as motor size 093 and motor length A, which set the installation envelope within the machine frame. Position or velocity data is supplied through tacho feedback with incremental or absolute encoder channels, allowing the motor to support systems that use pulse counting or absolute position reporting.
Frequently Asked Questions about MAC093A-0-WS-4-C-110-B:
Q: What is the centering diameter of the MAC093A-0-WS-4-C-110-B servo motor?
A: The MAC093A-0-WS-4-C-110-B has a centering diameter of 110 mm for accurate alignment during installation.
Q: How is the MAC093A-0-WS-4-C-110-B servo motor cooled?
A: Cooling for this model is achieved through natural convection, eliminating the need for forced-air or water cooling equipment.
Q: What type of feedback does the MAC093A-0-WS-4-C-110-B provide?
A: This servo motor uses tachofeedback and can be equipped with either an incremental or absolute encoder for position and speed feedback.
Q: What is the nominal RPM of the MAC093A-0-WS-4-C-110-B servo motor?
A: The nominal speed for the MAC093A-0-WS-4-C-110-B is 2000 revolutions per minute.
Q: Where is the power connection located on the MAC093A-0-WS-4-C-110-B?
A: The power connection is located at the side B of this motor, making wiring straightforward in various mounting scenarios.
