Product Description:

The MAC093A-0-WS-4-C/110-A-0/WI518LV/S010 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Intended for analog drive systems, it converts command voltages into controlled shaft rotation for machine tools, packaging equipment, and other automated stations that rely on legacy control hardware. The unit installs directly on a flange and delivers the closed-loop precision required for repeatable industrial cycles.

The motor seats on a flange with a centering diameter of 110 mm, aligning the rotor for concentric coupling with external mechanics. Heat generated in operation is removed through natural convection, which eliminates the need for external blowers. The three-phase stator uses winding code WS, which matches the electrical characteristics of compatible analog amplifiers. Under rated excitation, it reaches a nominal speed of 2000 rpm and supplies continuous torque across the feedback range. Power conductors exit through a connector on side A, keeping cabling on the drive side of the machine. With a frame designation of 093, it occupies a medium body size in the MAC family.

The motor has the compact length code A, which minimizes overhang on linear slides while maintaining the magnetic volume required for torque production. Speed information is produced by the internal tacho generator at 3 V/1000 rpm, which suits velocity loops that depend on linear voltage feedback. Position data is handled by an incremental encoder mounted in the standard interface, and the terminal board can also accept an absolute encoder when absolute referencing is required. The motor does not include an integral holding brake, so external locking or maintained drive current must secure the axis at standstill. Tacho quality is standard, and the combined tacho and encoder wiring simplifies connection to analog controllers.