Product Description:

The MAC093A-0-PS-4-C/110-A-1/WI560LV is a servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is supplied as a motor for analog drives, where it converts current setpoints from older servo controllers into accurate rotational motion for indexing tables, feeders, and other automated axes in manufacturing cells. Its analog-drive format suits established machine platforms that rely on current-command interfaces rather than digital network control. This makes it suitable for equipment that still uses analog amplifiers but needs dependable rotary feedback and stable low-speed behavior.

This model reaches a nominal speed of 3000 rpm, allowing fast cycle times when paired with analog velocity loops. Mechanical alignment is handled by a centering diameter of 110 mm, which mates with precision-bored mounting flanges. Heat generated by the stator is removed through natural convection, so no external blower or liquid circuit is required. Power conductors enter through a connector on side A, which helps keep cable routing direct inside cabinets. The built-in tacho generator delivers 3 V/1000 rpm for speed feedback, and its quality is standard for general-purpose motion axes. The feedback arrangement also allows the controller to use tachometer output together with encoder signals for speed or position control without external transducers.

Winding code PS sets the resistance and inductance values used with legacy MAC amplifiers. The motor uses size code 093 and length code A, a combination that balances torque density with manageable mass for gantry installations. Position feedback is provided by an integrated incremental encoder mounted in the standard location, while a standard blocking brake holds the shaft when the drive is disabled. The brake supports load holding during stops or power-off conditions. The analog-drive format uses signal levels and connector pinouts that match earlier Indramat controller generations.