Product Description:

The MAC093A-0-PS-3-C/110-A-2/S005 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Classified as a motor for analog drives, it converts drive-amplifier commands into controlled rotary motion for positioning tasks in assembly lines, packaging axes, and other automated stations. This type of motor is commonly used where the amplifier regulates torque and speed through closed-loop feedback during indexing, feeding, and synchronized transfer movements. The unit is supplied with a heavy-duty blocking brake, so it can hold loads when power is removed from the drive.

The integral brake supplies holding force of 14 Nm, allowing static load retention on vertical or suspended shafts. A machined 110 mm centering diameter aligns the housing precisely against mounting flanges and helps maintain accurate installation and coupling alignment. Heat generated by the windings is dissipated through natural convection, eliminating the need for auxiliary fans and keeping the housing externally cooled. The motor includes tacho feedback and a second shaft end, which allows speed monitoring and makes it possible to use an external encoder if required. Under rated excitation, the rotor reaches a nominal speed of 3000 rpm, which suits many general-purpose transmission ratios in automated machinery.

Power is supplied through a molded connector on side A, which can simplify cable routing inside compact machine frames and reduce interference with nearby mechanical components. The internal tacho generator develops 3 V/1000 rpm, giving the drive amplifier a proportional analog signal for closed-loop velocity control across the operating range. The motor uses winding code PS for its electrical characteristics and corresponds to size 093 with motor length A. This arrangement keeps the housing compact for multi-axis installations while matching 220 V class drive applications that require a small mounting footprint and stable analog speed feedback.