Product Description:

The MAC093A-0-PS-2-C/110-B-1/S001 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Classified as a motor for analog drives, it translates commanded current into controlled torque and speed for automated machinery. Production cells, material-handling axes, and packaging stations use this unit for repeatable motion, and the integrated feedback lets the amplifier correct speed changes caused by varying loads. It is suitable for positioning duties where stable speed feedback is needed over repeated cycles.

Its 110 mm centering diameter positions the motor accurately against mating flanges, which helps reduce radial runout in belt drives or gearboxes. The Motor size 093 frame provides a mid-range stator cross-section that balances torque output with manageable mass for horizontal or vertical mounting. Heat is removed through natural convection, so no external blower is required and enclosure airflow remains simple. During continuous operation, the shaft reaches a rated speed of 3000 rpm, which suits common transmission ratios. The PS winding code identifies the electrical winding arrangement used for this speed class and supports proper matching with compatible analog current controllers.

Position and velocity feedback are generated by a built-in tachogenerator with standard tacho quality. At synchronous speed, the sensor delivers 3 V per 1000 rpm, providing a linear feedback signal for closed-loop speed regulation. Power conductors enter through a connector on side B, which helps keep cable routing away from the service side of the motor. The mechanical stack uses motor length A, keeping the axial dimension compact within the 093 frame. A standard blocking brake engages automatically when power is removed, so the motor can hold the load during stopping periods or emergency stops.