Product Description:

The MAC093A-0-PS-2-C/110-B-0/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat as part of the MAC AC Servo Motors series. Intended for analog drive systems, the unit converts voltage commands from a drive amplifier into regulated torque and speed for automated machinery. Permanent-magnet excitation combined with an integrated tachogenerator provides the responsiveness required for point-to-point positioning, continuous speed holding, and repetitive duty cycles in industrial automation.

The motor mounts through a centering diameter of 110 mm, ensuring coaxial alignment with gearboxes or direct-drive loads. Heat is removed by natural convection, so no additional fan or liquid circuit is necessary when airflow around the housing remains unobstructed. The motor has a nominal speed of 3000 rpm under rated conditions. Power leads enter through a connector on side B, keeping cabling clear of the output shaft side. Velocity feedback is produced at 3 V/1000 rpm, which matches the input range of standard analog servo controllers. The A-length housing balances torque capacity with minimal overall depth, and the tacho is built to standard quality for general motion tasks.

The motor is supplied without a blocking brake, so any required load-holding function must be provided by the external drive or a mechanical lock. The winding code PS indicates the phase resistance and inductance used with MAC-series analog drives. Mechanical interchangeability across machines is supported by motor size 093, which uses a common flange pattern within the series. Speed regulation relies on tacho feedback, allowing the controller to close the velocity loop directly from the generated DC signal. This arrangement eliminates the need for a separate encoder in applications that do not require absolute position data.