Product Description:

The MAC093A-0-PS-2-C/110-A-1/S005 is an AC servo motor built by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Designed for analog drives, it converts controller commands into precise mechanical rotation for positioning, velocity, and torque control on automated machinery. The motor is suited for mid-range axes that require closed-loop operation without auxiliary cooling hardware. This makes it a practical choice for packaging lines, material-handling gantries, and light machining centers where stable speed control and repeatable motion are required.

This model uses motor size 093 with length A, giving it a compact body and a centering diameter of 110 mm for accurate mounting to gearboxes or machine flanges. Its nominal operating speed is 3000 rpm, allowing direct coupling to loads that need consistent high-speed rotation. Heat is removed by natural convection, so no external fan or liquid circuit is required. Rotor position and speed are monitored through tacho feedback, which provides the drive with a continuous signal for regulation. A standard blocking brake is integrated to hold the shaft when power is off and to help prevent uncommanded motion on vertical or overrunning loads. The winding is matched for use with compatible MAC series analog drive amplifiers.

Electrical power reaches the stator windings through a connector positioned on side A, which can help keep cable routing straightforward when neighboring components share the same orientation. The tacho produces 3 V/1000 rpm, giving the drive electronics a linear feedback signal for speed regulation across the operating range. The winding label PS distinguishes this unit from other winding options in the same frame size. This helps separate motors with different electrical characteristics during installation and service. The connector arrangement also keeps the power entry point clearly identified at the motor housing.