Product Description:

The MAC093A-0-LS-2-C/110-B-1 is an AC servo motor produced by Bosch Rexroth Indramat and placed in the MAC AC Servo Motors series. As a motor for analog drives, it translates the current reference from a proportional controller into controlled shaft torque and speed for automated material-handling axes, indexing tables, and packaging stations. Its permanent-magnet rotor works with internal tacho sensing to support responsive closed-loop operation. That arrangement lets the drive compare commanded and actual motor speed directly, which helps the axis remain stable when the mechanical load changes during normal motion.

Its physical interface follows the motor size 093 frame with length code A, and a centering diameter of 110 mm aligns the flange accurately to adjoining machine plates. Heat generated in the stator windings is removed by natural convection, so no external blower or liquid circuit is required. Under rated supply conditions, the rotor can achieve a nominal speed of 4000 rpm, providing a useful balance of throughput and dynamic response for medium-inertia equipment. A standard blocking brake locks the shaft when the drive is disabled, which helps the motor hold position when external motion must be prevented.

Service connections are routed through a power connector on side B, which can simplify cable layout in compact control cabinets. Motion feedback relies on standard tacho feedback; the built-in generator outputs 1.5 V/1000 rpm, giving the analog controller a direct linear speed signal. The electromagnetic circuit uses winding designation LS, which matches drives that supply the required current and voltage profile. This feedback arrangement supports analog speed regulation without requiring an additional pulse encoder in applications that do not need discrete position counting.