Product Description:

The MAC092B-0-QD-3-C/095/A-0-S001 is a servo motor manufactured by Bosch Rexroth Indramat as part of the MAC AC Servo Motors series. It serves as the rotary element in analog drive systems, converting current-loop commands into controlled torque for positioning tasks in packaging machines, printing lines, and material-handling axes. When paired with a compatible amplifier, the motor supports accurate speed and position control during repeated start-stop cycles. Its feedback-based operation lets the connected controller correct motion deviations caused by changing loads and maintain stable performance throughout a production cycle.

One geometric reference on the frame is the centering diameter of 95 mm, which aligns the flange accurately against machine brackets and maintains coaxial mounting. Heat created in the stator dissipates through natural convection, so no fan or liquid circuit is attached and cooling depends on ambient airflow around the housing. Velocity feedback originates from a tacho feedback device that issues a proportional voltage for the drive regulator. The motor uses a connector fitted on side A to deliver three-phase power while keeping cable routing aligned with the machine layout and clear of nearby moving parts.

A second shaft end allows mounting of an external encoder or mechanical brake wheel without disturbing the primary load interface. The speed sensor follows standard tacho quality, which provides a consistent voltage gradient for compatible analog regulators. Because this unit is a motor for analog drives, its electrical characteristics are matched to current-controlled amplifiers rather than digital PWM hardware. The motor has no blocking brake, so any static holding duty on vertical or suspended loads must be handled by an external device or by drive torque while energized.