MAC092B-0-QD-2-C/095-A-2/S013
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911239685
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAC Permanent Magnet Motor manufactured by Bosch Rexroth Indramat. This motor has a power connecter on Side A. This motor also includes a B encoder and a Natural Convection blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Robust servo motor MAC092B-0-QD-2-C/095-A-2/S013 is designed for accurate control in industrial settings. It has a basic motor acceleration of 2000 min-1 & can deliver up to 10.5 Nm of maximum torque at standstill. Its constant torque at still is 7.2 Nm. At still, the motor runs constantly at 11.9 A, with an ultimate current of 17.4 A. Its windings resistance equals 0.97 Ohm, its windings capacitance is 5.1 mH, its torque steady at 20 C is 0.67 Nm/A, & its rotor moment of inertia equals 36 x 10-4 kgm2.
The motor has a thermal constant time of 60 (45) minutes and is capable of handling an ultimate peak pulse current of 86 Amperes. The total weight of the motor is 18 kilograms. The motor may deliver the greatest torque (Mmax) during acceleration for brief tasks up to 300 ms. Mmax is available up to the "knee" RPM n100 at 100% mains power and up to the "knee" RPM n90 at 90% mains power.
Take the new unit out of its container before inserting the encoder unit. The filler cap (10) must then be taken off of the encoder housing. Make sure the expander (8) is not stiff. Verify that the enclosed coupling unit fits onto the expander (8) with ease. If not, position the adjustment tool onto the expander's (8) hexagon and secure it there. Turn the expander (9) six rounds to the left with an Allen key (SW4). By doing this, any strain in the expander should be released, making it ready for the encoder unit to be mounted correctly. You can guarantee that the motor and its parts are fitted properly and operate dependably and efficiently in your industrial applications by following these methods.
