Product Description:

The MAC092A-0-DD-2-C/095-B-0/S001 is an AC servo motor in the MAC AC Servo Motors series and is built by Bosch Rexroth Indramat. It is supplied as a closed-loop rotary actuator for use with analog drive controllers, where speed and torque must follow a continuously varying reference signal. In automated assembly lines, packaging stations, and material-handling axes, the motor converts drive output into mechanical rotation that can be synchronized closely with process motion requirements.

The mechanical interface includes a centering flange diameter of 95 mm, which provides a reference surface for shaft alignment on gearboxes or machine frames. Thermal regulation relies on natural convection, so heat leaves the stator through the housing fins without forced airflow, and the installation must allow free air circulation around the frame. Position and speed are reported through integrated tachometer feedback, allowing the connected analog drive to generate a proportional voltage signal for velocity control loops. The motor has no blocking brake, so holding torque during power-off must be supplied by an external device if the load cannot coast to rest safely. Power leads enter through a connector on side B, which helps route cables toward the non-drive end and keeps the shaft side unobstructed.

This unit is classified as a motor for analog drives, so its internal windings and feedback scale match current-mode amplifiers that rely on continuous command voltages rather than digital setpoints. The tacho generator delivers a standard quality signal, which is suitable for mid-range speed control where precision finer than one percent of rated speed is not required. The housing and connection arrangement follow the dimensional format used for this motor line, allowing the unit to fit common mounting layouts without changing its basic cooling method or signal connection style.