Product Description:

The MAC092A-0-DD-2-C/095-A-0 is an AC servo motor built by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It converts analog drive commands into rotary motion for conveyor axes, tool changers, and pick-and-place units in automated lines. The housing follows the IEC flange pattern used across the series, so the motor can mount directly to gearboxes or machine frames without adapter plates. Its layout suits systems that use a separate drive amplifier and conventional motor wiring.

The motor face includes a centering register of 95 mm, which helps keep the shaft and driven load concentrically aligned during operation. The cooling type is natural convection, so the aluminum housing releases heat through ambient airflow rather than forced fans, and space around the fins should remain open during continuous operation. For velocity feedback, a built-in tacho feedback generator delivers a proportional DC voltage to the drive, eliminating the need for an external feedback device in many analog systems. Power reaches the stator through a dedicated connector positioned on side A, which keeps the main cable entry at one end of the motor and simplifies routing.

The motor has no blocking brake, so the shaft coasts when power is removed and any holding requirement must be handled by the drive or by an external mechanical lock. It is intended as a motor for analog drives, so its winding and feedback characteristics are matched to legacy controllers that regulate speed through analog command signals rather than fieldbus control. Within that arrangement, the built-in tachogenerator has standard tacho quality, which keeps ripple low enough for stable low-speed control in typical machine-duty applications. This format is well suited to retrofit or replacement work where an existing analog control structure is already in place.