MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
32 Seconds
The Bosch Rexroth Indramat MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 is part of the MAC AC Servo Motors series and is a motor for analog drives. It features axial surface cooling, a centering diameter of 130 mm, and a blower voltage of 230 V AC. The motor is equipped with a tacho feedback incremental or absolute encoder and achieves a nominal speed of 1500 RPM.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 is an AC servo motor manufactured by Bosch Rexroth Indramat for the MAC AC Servo Motors series. Classified as a motor for analog drives, it converts command voltages into precise torque and speed for controlled motion. This unit is used in equipment that requires repeatable motion, rapid reversals, and stable low-speed operation, such as pick-and-place gantries, winding machines, and indexing tables. Its integrated feedback arrangement allows the connected amplifier to monitor motion response during positioning and speed-regulated operation.
The motor uses a KD winding, which indicates the resistance and inductance values expected by the matched drive. An integrated blower rated at AC 230 V forces air across the housing to support continuous-duty operation. This forced airflow helps keep winding temperature stable during repeated starts, reversals, and sustained running at low shaft speeds. The rotor reaches a nominal speed of 1500 rpm, and the built-in tacho generator outputs 3 V/1000 rpm for analog speed feedback. The motor is supplied with no blocking brake, so holding torque at standstill must be provided by the drive or by an external mechanical lock. Tacho quality is standard for general-purpose velocity control, and the analog speed signal supports control layouts that use a dedicated velocity feedback channel.
Mechanical integration uses a flange with a 130 mm centering diameter that aligns the stator with the machine frame. Power conductors exit through a connector on side A, which helps keep cable routing consistent with other MAC family motors and can reduce cable bends in compact machine layouts. Heat is removed by axial surface cooling, so clearance around the blower inlets should be maintained for steady airflow. Position data is provided by an incremental encoder mounted in the standard configuration, and the wiring harness also supports optional absolute signals in the feedback configuration. This feedback arrangement supports repeatable position tracking during routine automation cycles.
Frequently Asked Questions about MAC090C-1-KD-4-C-130-A-0-WI520LV-S011:
Q: How is the MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 AC servo motor cooled?
A: This MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 motor is equipped with axial surface cooling for thermal management.
Q: Where is the power connection located on the MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 servo motor?
A: The power connection for this model is via a side A connector.
Q: What is the nominal RPM of the MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 motor?
A: The MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 has a nominal rotational speed of 1500 min-1.
Q: What type of feedback configuration is available on the MAC090C-1-KD-4-C-130-A-0-WI520LV-S011?
A: This servo motor provides feedback through a tachofeedback system that supports both incremental and absolute encoders.
Q: Is a blocking brake included with the MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 servo motor?
A: The MAC090C-1-KD-4-C-130-A-0-WI520LV-S011 does not come with a blocking brake.
