MAC090C-0KD-4-C/110-B-1/WI522LV
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAC090C-0KD-4-C/110-B-1/WI522LV AC servomotor by Bosch Rexroth has a plain output shaft. This motor has a standard pilot diameter for the mounting flange. It is equipped with a shaft sealing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC090C-0KD-4-C/110-B-1/WI522LV AC servomotor by Bosch Rexroth is cooled by natural convection. This servomotor is always equipped with tacho feedback. The product has a tacho voltage that matches its nominal speed. This device can be installed in machines with low shock loads. The unit related velocity feedback is detected by the mounted encoder. Its encoder is extremely resistant to environmental conditions. This motor-related encoder with square-wave pulses that have a supply voltage of 5 V or 10 V to 16 V. The product has a standard blocking brake. This device supports a mechanical change of the reference point of its incremental encoder. The unit associated torque-speed characteristics can be used to establish the maximum usable speed that is possible for a special application with known torque requirements. Its maximum torque is limited by the drive controller. This motor-related operating curves depict the intermittent operating torque with S6 operating mode as per DIN VDE 0530 specifications. The product features a continuous torque of 10.4 Nm in standstill mode with 60K overtemperature at the housing. This device-related connecting cables and connectors have to be bought separately. The unit has a rating plate attached to its housing. It is possible to fit a second rating plate over the first rating plate. The servomotor has a spigot nut in the center of each of its connectors. This product incorporates a mounting flange with throughholes for Design B5 mounting. The device is used in conjunction with a TDM drive controller. The unit can be mounted either horizontally or vertically.
Frequently Asked Questions about MAC090C-0KD-4-C/110-B-1/WI522LV:
Q: Where is the shaft sealing of the MAC motor attached?
A: The shaft sealing of the MAC motor is attached to its housing.
Q: What is the protection category of the MAC motor?
A: The protection category of the MAC motor is IP 65.
Q: What kind of tacho does the MAC motor have?
A: The MAC motor has a standard type tacho.
Q: What are the two types of feedback connectors supported by the MAC motor?
A: The two types of feedback connectors supported by the MAC motor are straight connectors and angle connectors.
Q: How is the holding brake of the MAC motor controlled?
A: The holding brake of the MAC motor is controlled by a PLC or a hardware switch.
