Product Description:

The MAC090C-0-KD-4-C/110-B-0/WI560LV is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. It is intended for use with legacy analog drive controllers, where velocity or torque loops are closed externally. In automated machinery, the unit converts electrical power into controlled rotary motion for positioning axes, indexing tables, and continuous-duty feed systems. This arrangement fits applications that rely on separate feedback evaluation rather than fully integrated digital drive functions.

The winding code KD identifies the electrical characteristics used by compatible drive modules. Under nominal load, the rotor turns at 1500 rpm, a speed that suits gear ratios commonly used in packaging and material-handling equipment. A built-in tacho generator outputs 3 V/1000 rpm, providing a proportional velocity signal for the analog drive. Heat produced in the stator is dissipated by natural convection, so no forced airflow is required when the installation has suitable ambient conditions. Power conductors enter through a connector on side B, which helps route the motor cable along the non-drive end of the machine frame and keep it separated from sensitive feedback wiring.

The motor is supplied with no blocking brake, so any holding function after power loss must be provided by an external mechanism when the application requires load retention. Shaft alignment to gearboxes or couplings is assisted by a centering diameter of 110 mm, which provides a repeatable concentric reference during installation. Position information is delivered by an incremental encoder with standard mounting, and the encoder signal works with the tacho feedback to support stable motion control. When paired with an analog velocity loop, this configuration functions as a motor for analog drives and supports consistent speed regulation in established control platforms.