Product Description:

The MAC090C-0-KD-4-C/110-A-0/WI524LV/S005 belongs to the MAC AC Servo Motors series produced by Bosch Rexroth Indramat. It is a motor for analog drives that converts drive-controller current commands into rotary motion for positioning tasks in industrial automation. This type of motor is typically used where steady speed regulation and repeatable axis movement are needed across production cycles. Its configuration also suits older control platforms that rely on analog command structure rather than integrated digital networking. The model is supplied without a blocking brake, so an external holding method is required whenever power is removed.

The rotor is guided by a centering diameter of 110 mm, which matches standard flange interfaces and helps keep axial misalignment low during installation. Heat is removed through natural convection, so no fan or liquid circuit is installed, and the housing must be mounted where surrounding air can move freely. Under rated conditions, the shaft reaches 1500 rpm, which suits moderate-speed positioning duty in equipment that does not require very high rotor speed. A built-in tacho generator delivers 3 V/1000 rpm, providing an analog velocity signal for compatible drive cards. Winding code KD identifies the coil resistance and inductance used for 110 V class supplies and common servo amplifiers.

Position verification is handled by an incremental encoder mounted in the standard adapter, supporting consistent feedback for monitored axis movement. Power conductors exit through a connector on side A, which can simplify cable routing in cabinets that place the drive to the left of the motor or need a particular cable direction. A factory-installed shaft sealing ring limits lubricant escape and helps block airborne contaminants from reaching the bearing set. Because the cable exit and feedback arrangement are built into the motor body, installation can remain compact in enclosed machine spaces. Its interface layout suits existing analog control systems and established machine layouts.