Product Description:

Bosch Rexroth Indramat's MAC090C-0-KD-4-C/110-A-0/WI518LV/S001 belongs to the MAC AC Servo Motors series and is supplied as a motor for analog drives. It converts electrical commands from a drive into controlled rotary motion, so it is used on axes that need precise speed and position regulation in automated production, material handling, and packaging machinery. Because it is intended for analog drives, current and speed loops are processed in the external controller rather than inside the motor, which keeps the motor focused on torque production and feedback delivery.

The shaft seats against a centering pilot of 110 mm, allowing repeatable alignment with gearboxes or mounting flanges during installation. During continuous duty, the rotor stabilizes at a nominal speed of 1500 rpm, a value that supports steady operation and guides drive tuning and mechanical sizing. Heat generated by copper losses is removed through natural convection, so no auxiliary fan is fitted and surrounding airflow remains simple. Power is delivered through a connector on side A, which allows cable routing in the same direction as sensor leads, and winding code KD identifies the electrical configuration used with the corresponding voltage, current, and torque curves in the drive parameter set.

Position feedback is handled by an incremental encoder mounted in the standard housing interface, while velocity feedback comes from an attached tachogenerator that produces 3 V/1000 rpm. The tacho quality is standard, indicating typical linearity and phase characteristics for speed regulation in analog systems. The motor has no blocking brake, so any vertical or load-holding axis must rely on external mechanical locking or static drive torque when power is removed. This arrangement is suitable where continuous motion control is required and separate holding hardware can be provided by the machine design.