Product Description:

The MAC090C-0-KD-1-B/110-B-1/I1000 is a servo motor produced by Bosch Rexroth Indramat and assigned to the MAC AC Servo Motors series. Intended for use with analog drive systems, it converts drive controller commands into mechanical rotation for positioning and speed-regulated automation axes on packaging, material handling, and machining equipment. Integrated feedback functions allow the connected controller to monitor motor behavior during operation, which supports stable axis response across varying loads and motion profiles.

With a centering diameter of 110 mm, the flange aligns precisely to machine structures and promotes repeatable shaft concentricity. Heat generated in the stator is removed by natural convection, so the unit can be mounted without external blowers or liquid circuits. During continuous operation, the rotor achieves 1500 rpm at rated voltage and load, giving a predictable speed reference for gear selection and axis tuning. Winding code KD indicates the motor's resistance and inductance balance, so current draw matches the drive's analog output stage. A built-in tachogenerator produces 3 V/1000 rpm, supplying a proportional velocity signal used by many legacy controllers for closed-loop regulation.

A blocking brake holds the shaft when power is removed, preventing axis drift on vertical or otherwise load-sensitive applications. Motion feedback to the controller is delivered through incremental encoder feedback, enabling fine position interpolation over the full revolution. Power conductors are terminated through a connector on side B, which can simplify cable routing in cabinets that favor right-hand service access. The unit is also identified as a motor for analog drives, making it suitable for use with older TDM and KDS amplifier families while preserving the original control arrangement.