Product Description:

The MAC090C-0-KD-1-B/110-A-0-I00625/S001 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It delivers controlled torque and speed for motion axes in automated machinery such as handling gantries, printing equipment, and material-forming lines. The motor converts commanded current into mechanical rotation, while integrated tacho and encoder signals allow the connected drive controller to maintain closed-loop speed and position response. This arrangement supports stable operation during acceleration, deceleration, and steady running.

In mechanical terms, the rotor is centered with a 110 mm pilot diameter, which helps align the motor with gearboxes or flange-mounted machine elements. Heat produced by copper losses is removed through natural convection, so the housing needs unobstructed ambient airflow. Under rated excitation, the shaft reaches a nominal speed of 1500 rpm, which suits many low-noise positioning tasks. Position and velocity feedback come from an incremental encoder feedback system that sends high-resolution incremental signals to the drive. The electromagnetic characteristics follow the KD winding code, which indicates the phase resistance, inductance, and current requirements used by compatible drive electronics.

The motor is supplied without a blocking brake, so any static holding force must come from the drive or external mechanical retention. Power conductors exit through a connector on side A, which supports fixed cable routing in machines with a preferred connection direction. A built-in tacho generator outputs 3 V/1000 rpm, giving the analog controller an immediate velocity reference without digital processing delay. The device is classified as a motor for analog drives, so it is intended for use with compatible analog servo control platforms.