Product Description:

Bosch Rexroth Indramat manufactures the MAC090C-0-KD-1-B 110-A-0/1000625/S005, a member of the MAC AC Servo Motors series that operates as a motor for analog drives in industrial automation. It translates analog velocity or position commands into precise rotary motion for machine axes, conveyors, and other electromechanical assemblies used in continuous-duty production lines. Integrated motor feedback allows the connected drive to monitor movement continuously and correct deviations during speed or positioning tasks. Its analog-drive design also suits existing equipment that relies on conventional amplifier architecture rather than integrated digital control electronics.

The motor centers on a faceplate with a 110 mm register to maintain concentric alignment with gearboxes or mounting adapters. Heat is removed by natural convection, so no external blower or liquid circuit is necessary. Rotor speed reaches a nominal 1500 rpm, which supports steady operation in medium-inertia applications. Motion feedback is generated through incremental encoder feedback, providing pulse trains that analog control cards use for closed-loop regulation. Because cooling is passive, the motor runs without the added maintenance associated with fan-driven airflow.

The output end uses a shaft seal, which helps limit lubricant migration and contaminant entry at the shaft opening. Power conductors exit through a connector on side A, which can simplify cable routing when adjacent machine components occupy the opposite side. For speed verification by legacy tachogenerator circuits, the built-in tacho provides 3 V/1000 rpm of back EMF for proportional voltage monitoring. The motor uses winding code KD, which corresponds to the electrical values expected by compatible drive amplifiers. The motor has no blocking brake, so any static load holding must rely on drive torque or external mechanical restraints.