MAC090C-0-GD-4-C/110-B-0/WI531LX
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911223228
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAC Permanent Magnet Motor manufactured by Bosch Rexroth Indramat. This motor has a power connecter on Side B. This motor also includes a Incremental Encoder with Standard Mounting encoder and a Not Equipped blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC090C-0-GD-4-C/110-B-0/WI531LX servomotor works in combination with the manufacturer’s KDS drive controller. The Bosch Rexroth servomotor has low inertia because of the choice of materials for its permanent magnets. This product uses cables that are designed to meet IP 65 demands for its connection. The device produces backlash-free transmission of torque with its plain shaft. This unit uses angle or straight connectors for the encoder as well as tacho feedback connections. Its load factors must be multiplied when the ambient operating conditions are over the specified limits. The motor cable cores and gasket must be protected against damage when the connector screws are retightened after setting the direction of the angle connector.
This product-related speed and torque limiting data are depicted through its operating curves. The device-related torque-speed characteristics help in determining whether the application is within the thermal limits. This unit has a maximum of 30,000 operating hours lifespan for the bearings. Its related drive controller has standardized electrical connections. The motor uses an INS 108 circular connector for the power connection. This product must have its protective covers and sleeves intact during its storage and transportation. The device can at no time be stored in a vertical or upright orientation. This servomotor has a warranty period of one year and is shipped worldwide.
The motor has a 20.2A phase current rating. This product also portrays a 196A maximum pulse current rating. The device uses tacho feedback and power cables from the manufacturer with poor adhesion to avoid the chance of sticking in drag chains. This unit encompasses shielding for the encoder cable. Its power and encoder cables must be routed at a distance of 100m from each other. The product incorporates a metallic partition to avoid interference from power cables. This device is to be kept dry during transport and storage. The unit storage and transportation should be done between -25°C and 85°C.
