MAC090C-0-GD/4-C/110-A-1/WI538LX/S01
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAC090C-0-GD/4-C/110-A-1/WI538LX/S01 is a synchronous servo motor built by Bosch Rexroth Indramat. The motor contains an air blower which helps to dissipate heat by surface cooling. The nominal speed of the motor is 3000 revolutions per minute.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC090C-0-GD/4-C/110-A-1/WI538LX/S01 is an impressive servo motor that belongs to the MAC motor series from Bosch Rexroth Indramat. The motor is an impressive machine that is intended to withstand harsh environmental conditions and still maintain its characteristic high operation efficiency. The housing of this impressive servo motor is reinforced, and it is specially designed to allow for the mounting of the motor in any orientation without problems. To protect the motor from overload damage, and ensure optimum heat regulation, the MAC090C-0-GD/4-C/110-A-1/WI538LX/S01 servo motor contains thermo switches integrated into the motor windings and stator housing. The thermo switch monitor the motor operation, and aids the drive controller in regulating the motor temperature. The thermo switches are responsible for the high overload capacity of the motor. The servo motor requires a power cable and the motor feedback cable, these two cables enter into the housing of the motor through the special electrical interference built into the motor housing
The MAC090C-0-GD/4-C/110-A-1/WI538LX/S01 servo motor operates at a speed of 3000 revolutions per minute, however at standstill, the continuous torque of the motor is 9.6 newton meters while the continuous current is 24.8 amperes. When the temperature on the motor housing surface is about 20 degree celsius, the motor maintains a torque constant of 0.43 newton meters per ampere, and a windings resistance of 0.24 ohms.
The air temperature around the housing of the MAC090C-0-GD/4-C/110-A-1/WI538LX/S01 servo motor should be kept within 0 to 45 degrees. A standard electrically actuated holding brake is integrated into the motor and delivered with it. The holding brake can generate a torque of 6.5 newton meters, and operate with a nominal current of 0.7 amperes.
Frequently Asked Questions about MAC090C-0-GD/4-C/110-A-1/WI538LX/S01:
Q: How does the holding brake work?
A: The holding brake functions according to the electrically actuated released principle.
Q: Is the operation of the motor with third party controllers allowed?
A: No. Only the TDM, KDS, and DSC drive controller should be used for the control of the motor.
Q: What does the shaft sealing ring do?
A: The shaft sealing ring prevent liquid from entering the motor housing through the motor shaft.
Q: Can the MAC090C-0-GD/4-C/110-A-1/WI538LX/S01 motor be used in residential areas?
A: The operation of the motor in residential areas is possible. However special measures to prevent electrical interference must be provided.
Q: What other connectors are integrated into the motor's power connectors?
A: Additional connectors present in the power connection include the power cable, connecting cable for thermo switches, and the connecting cable for holding brake.
