Product Description:

The MAC090C-0-GD-4-C/110-A-1/WI524LX/S001 is an AC servo motor manufactured by Bosch Rexroth Indramat and supplied as part of the MAC AC Servo Motors series. It is designed to interface with analog velocity and position controllers, supplying closed-loop rotary motion for automated packaging lines, printing cylinders, and assembly stations. Within these systems, the motor converts command currents into mechanical torque so that machinery follows programmed speed and position profiles. This arrangement suits equipment that uses conventional analog control architecture and requires consistent motion response during continuous operation.

Mechanical mounting is centered by a 110 mm centering diameter, which aligns the stator housing to gearheads or machine frames. Heat is removed through natural convection, so airflow over the external surface is sufficient without fans or liquid circuits. The electromagnetic profile is identified by winding code GD, which matches the motor to drive settings for voltage, current, and torque limits. Mains power reaches the stator through a connector on side A, allowing cable runs to remain on one face of the machine. For holding loads when power is removed, a standard blocking brake is integrated to stop shaft rotation and maintain position during shutdown or emergency stop conditions.

Rotary feedback is provided by tacho feedback with an incremental or absolute encoder, enabling the controller to monitor speed and detect direction changes during operation. Position reference comes from an incremental encoder with standard mounting, and the flange geometry and shaft coupling follow conventional layouts used on standard brackets. The motor is classified as a motor for analog drives, so its signal interface uses tacho signals and encoder pulses rather than digital fieldbus data. A standard tacho quality rating helps keep pulse generation uniform across the speed range and supports smooth speed regulation.