Product Description:

The MAC090C-0-GD-4-C/110-A-0/WI520LV-S001 is an AC servo motor produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. Integrated into automated assemblies, it pairs with analog servo amplifiers to transform electrical commands into regulated rotary motion. By delivering controlled torque and speed, the unit supports indexing tables, pick-and-place axes, and conveyor zones where repeatable positioning and stable velocity help keep the production cycle within tolerance.

Mechanically, the stator housing seats against a centering shoulder that measures 110 mm, easing alignment with gearboxes or mounting flanges. The internal coil arrangement follows winding code GD, matching resistance and inductance values used by analog drives. Heat is removed through natural convection, so no blower or liquid circuit is required. Supply conductors connect through a connector on side A, allowing straight cable routing from cabinet to motor without bends around the rear. The motor has no holding brake, so static loads must be retained by the drive’s torque loop or by an external mechanical lock.

Velocity information is provided through tachofeedback with incremental or absolute encoder wiring, giving the drive a continuous voltage proportional to speed while still offering digital position tracks. For systems that need only coarse commutation or step counting, the built-in incremental encoder with standard mounting supplies industry-standard 1 Vpp or TTL channels. Output repeatability is assisted by a standard tacho quality grade, which keeps the tachometer’s volts-per-radian variation within commonly accepted servo tolerances. All control elements are packaged for a motor for analog drives environment, so the unit fits established MAC motion platforms that use analog control architecture.