MAC090B-1-PD-1-B/110-A-0-I00625/S001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC090B-1-PD-1-B/110-A-0-I00625/S001 is part of the MAC AC Servo Motors series and is a motor designed for analog drives. It comes with axial surface cooling, a centering diameter of 110 mm, and operates with a nominal speed of 1500 RPM. The motor features incremental encoder feedback and a power connection located on side A, with a blower voltage of 230 V AC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC090B-1-PD-1-B/110-A-0-I00625/S001 is an AC servo motor produced by Bosch Rexroth Indramat for the MAC AC Servo Motors series. It is intended for closed-loop motion axes in industrial automation where precise velocity and position control are handled by external analog drive amplifiers. By combining a permanent-magnet rotor with electronic feedback, the unit converts electrical commands into controlled mechanical rotation for tooling, material-handling, and packaging machinery. The external amplifier uses the motor’s feedback signals to regulate speed and correct position errors during repeated motion cycles. This arrangement is commonly used on dedicated machine axes where stable analog command processing is already part of the control system.
The motor uses winding code PD, which indicates the electrical characteristics expected by the matching drive. A centering diameter of 110 mm aligns the flange on a gearbox or machine plate for accurate mounting. Its internal blower requires AC 230 V, and this forced airflow supports heat removal when the shaft runs at the nominal speed of 1500 rpm. For velocity feedback, a built-in tacho generator delivers 3 V/1000 rpm, producing a proportional signal for analog speed regulation. This separate speed signal helps the controller maintain smooth response during steady running and changing load conditions.
The housing uses axial surface cooling, so heat moves along the frame length toward the blower discharge instead of concentrating at the mounting face. Rotor position is monitored by incremental encoder feedback, which provides quadrature pulses for precise positioning and repeatable motion control. The motor is supplied without a blocking brake, so any static load holding must come from drive torque or an external mechanical device. Power enters through a connector on side A of the stator, and the unit is a motor for analog drives. The combination of speed and position feedback supports both continuous rotation and indexed motion without requiring external sensing hardware.
Frequently Asked Questions about MAC090B-1-PD-1-B/110-A-0-I00625/S001:
Q: Does the MAC090B-1-PD-1-B/110-A-0-I00625/S001 motor come with a blocking brake?
A: This model does not include a blocking brake.
Q: What is the blower voltage for the MAC090B-1-PD-1-B/110-A-0-I00625/S001 motor?
A: The MAC090B-1-PD-1-B/110-A-0-I00625/S001 features a blower that operates at AC 230 V.
Q: What type of cooling does the MAC090B-1-PD-1-B/110-A-0-I00625/S001 use?
A: Cooling is achieved through axial surface cooling in this motor.
Q: What type of feedback configuration does the MAC090B-1-PD-1-B/110-A-0-I00625/S001 offer?
A: This unit provides incremental encoder feedback for precise position monitoring.
Q: What is the nominal RPM of the MAC090B-1-PD-1-B/110-A-0-I00625/S001 servo motor?
A: The nominal rotational speed is specified as 1500 min-1 for this model.
