MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 is a motor for analog drives from the MAC AC Servo Motors series. It has a nominal speed of 1500 RPM and features a centering diameter of 110 mm. The motor uses natural convection cooling and comes with a standard blocking brake and incremental encoder for position feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 belongs to the MAC AC Servo Motors series produced by Bosch Rexroth Indramat. It is an AC servo motor intended for integration with analog drive controllers to provide precise speed and position control on automated machinery. Within an installation, the motor converts electrical power into regulated mechanical torque, supporting closed-loop motion tasks such as handling axes, tool positioning, or conveyor segments in industrial automation cells. The drive uses the motor’s feedback signals to correct speed changes and maintain commanded motion during operation. Its stator, rotor, and feedback package are aligned to match the dynamic requirements of companion analog amplifiers.
The motor has a centering diameter of 110 mm that mates directly with standard flange patterns. Inside the stator, the PD winding code indicates the turn count and conductor cross-section, yielding rated torque at a nominal speed of 1500 rpm. Heat produced by copper and iron losses is removed through natural convection, so the motor must be mounted with free airflow rather than enclosed ducts. Power conductors are routed through a connector on side A, simplifying cable runs along machinery frames. Tacho quality is standard, indicating the permissible ripple and linearity of the embedded velocity sensor for routine servo loops.
For holding functions, a blocking brake is fitted so the load remains stationary when drive power is removed. Speed feedback to the analog controller is provided by a tacho generator that delivers 3 V/1000 rpm, allowing proportional velocity monitoring without additional scaling hardware. Position information comes from an incremental encoder installed with standard mounting tolerances, and this device supplies phase-shifted pulse trains for position counting and commutation. Because the motor is classified as a motor for analog drives, its feedback configuration matches legacy amplifier stages that process analog velocity and digital position signals on separate channels.
Frequently Asked Questions about MAC090B-0-PD-4-C/110-A-1/WI524LV/S001:
Q: Is a blocking brake included on the MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 motor?
A: The MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 is equipped with a standard blocking brake.
Q: How is the MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 motor cooled?
A: This servo motor is cooled using natural convection, operating without forced air or liquid cooling systems.
Q: What type of position feedback does the MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 motor provide?
A: This model features incremental encoder position feedback with standard mounting for precise motor control.
Q: Where is the power connection located on the MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 motor?
A: The power connection for this motor is located on side A via a connector.
Q: What is the nominal operating speed of the MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 motor?
A: The MAC090B-0-PD-4-C/110-A-1/WI524LV/S001 operates at a nominal speed of 1500 min-1.
