MAC090B-0-PD-2-C/130-A-0/S03 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC090B-0-PD-2-C/130-A-0/S03 is a motor for analog drives in the MAC AC Servo Motors series. It operates at a nominal speed of 1500 revolutions per minute with natural convection cooling, and features a 130 mm centering diameter. The motor has a side A power connector and is equipped with standard tachofeedback with a tacho voltage of 3V per 1000 minutes minus one.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat's MAC090B-0-PD-2-C/130-A-0/S03 belongs to the MAC AC Servo Motors series and is engineered as a synchronous servo motor for analog drive systems. In automated machinery, it converts command voltages from an analog controller into precise rotary motion, allowing repeatable positioning and speed regulation on packaging lines, transfer stations, and similar motion axes. Its operating concept suits applications that rely on external analog control rather than onboard digital communication. The housing format is intended for machine axes that need predictable servo response during repeated duty cycles.
The motor seats against a flange with a centering diameter of 130 mm, giving the mounting face a clear reference for concentric alignment. Its winding set uses code PD; this combination of wire gauge and turn count sets the torque-to-current relationship and the stator impedance. Rated mechanical speed is 1500 rpm, providing a steady operating point that matches common gear ratios and machine cycle rates. Heat is removed by natural convection, so no external blower is required and the installation footprint can stay compact. Power enters through a connector on side A, which can simplify cable routing when that face is turned toward the cabinet. This layout also keeps the connection point accessible when the motor is mounted close to surrounding machine structures.
The unit is specified as a motor for analog drives, so torque follows a continuous analog command signal without embedded digital communication. Speed feedback is generated by a tachogenerator, and its tacho accuracy is classified as Standard for general-purpose velocity loops. At rated speed, the tachogenerator produces 3 V/1000 rpm, giving the drive a proportional voltage for closed-loop control. The feedback channel is supplied with tacho feedback, so no external encoder is required for primary speed regulation. The motor is supplied without a blocking brake, so holding torque during power-off must come from the drive or external locking hardware.
Frequently Asked Questions about MAC090B-0-PD-2-C/130-A-0/S03:
Q: Does the MAC090B-0-PD-2-C/130-A-0/S03 servo motor have a blocking brake?
A: The MAC090B-0-PD-2-C/130-A-0/S03 does not come with a blocking brake.
Q: What cooling method is used by the MAC090B-0-PD-2-C/130-A-0/S03?
A: This motor uses natural convection for cooling, operating without forced air or external fans.
Q: What type of feedback does the MAC090B-0-PD-2-C/130-A-0/S03 motor offer?
A: The MAC090B-0-PD-2-C/130-A-0/S03 provides tachofeedback for speed control and position monitoring.
Q: Where is the power connection located on the MAC090B-0-PD-2-C/130-A-0/S03?
A: The power connection for this model is located on side A via a connector.
Q: What is the nominal speed of the MAC090B-0-PD-2-C/130-A-0/S03 servo motor?
A: This model has a nominal rotational speed of 1500 min-1.
