MAC090B-0-PD-2-C/110-B-1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911225399
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAC090B-0-PD-2-C/110-B-1 is a motor for analog drives in the MAC AC Servo Motors series. It features a centering diameter of 110 mm and uses natural convection cooling. The motor includes standard blocking brake and tachofeedback with a nominal speed of 1500 RPM.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAC090B-0-PD-2-C/110-B-1 is a three-phase AC servo motor built by Bosch Rexroth Indramat for the MAC AC Servo Motors series and serves as a precise electromechanical actuator in automated machinery. By converting commanded current into controlled torque and speed, it supports positioning, velocity, and tension-control tasks in material handling cells, packaging stations, and indexing tables. Its servo design is suited to axes that need repeatable starts, stable running speed, and dependable motion during frequent operating cycles. This type of motor is commonly paired with established machine platforms that use dedicated servo amplifiers rather than integrated digital drive networks.
A centering shoulder of 110 mm simplifies alignment with flange interfaces, helping keep radial runout low during assembly. Heat is removed solely through natural convection, so no external blower or liquid circuit is required. Rotor speed is monitored by embedded tacho feedback, which provides an analog signal for the drive's velocity loop. Rated output speed reaches 1500 rpm, a nominal value suited to continuous-duty operation. The stator uses the PD winding, which gives the electrical values expected by the associated analog drive so it can apply correct current ramps without saturating the magnetic circuit.
The electrical interface is routed through a connector on side B, placing the power plug away from gearheads or pumps mounted on the opposite face and easing cable strain relief. Speed feedback is scaled at 3 V/1000 rpm, allowing the controller to track real-time velocity without digital conversion. A built-in blocking brake holds the shaft during standby or an emergency stop, helping prevent load drift when drive power is removed. That arrangement is useful on axes where the load must remain in place between motion commands. Because it is a motor for analog drives, loop adjustments are made at the matched drive amplifier, which fits systems that rely on analog control signals instead of networked command interfaces.
Frequently Asked Questions about MAC090B-0-PD-2-C/110-B-1:
Q: Does the MAC090B-0-PD-2-C/110-B-1 motor have a blocking brake?
A: The MAC090B-0-PD-2-C/110-B-1 servo motor comes equipped with a standard blocking brake for secure holding applications.
Q: What is the centering diameter of the MAC090B-0-PD-2-C/110-B-1 servo motor?
A: This model features a centering diameter of 110 mm for mounting alignment.
Q: What type of cooling does the MAC090B-0-PD-2-C/110-B-1 servo motor use?
A: Cooling is achieved via natural convection, allowing the motor to operate without external cooling devices.
Q: What type of feedback configuration does the MAC090B-0-PD-2-C/110-B-1 servo motor include?
A: Tachofeedback is provided on this motor, allowing speed feedback for closed-loop control.
Q: What is the nominal RPM rating for the MAC090B-0-PD-2-C/110-B-1 servo motor?
A: The nominal speed for the MAC090B-0-PD-2-C/110-B-1 is 1500 revolutions per minute (min-1).
